Browse Items · UAH Archives, Special Collections, and Digital Initiatives

"Manufacturing plan : Saturn V : booster stage S-IC. Volume 2."

Manufacturing plan for Saturn V Booster stage S-IC

"Manufacturing plan : Saturn V : booster stage S-IC. Volume 1."

This procedure provides the necessary information for the fabrication and assembly of the Saturn C-5 booster stage S-IC. The manufacturing methods outlined herein represent techniques that will be utilized both at Michoud and MSFC wherever possible. The concepts and methods outlined are of a preliminary nature consistent with the stage of design at this time. These concepts and methods are subject to change. This Manufacturing Plan will be periodically updated to reflect such changes. The processes and techniques proposed in this Manufacturing Plan are generally within the present state of the art, consistent with reliability requirements for manned space flight and advocated for use with the limited manufacturing facilities of the Marshall Space Flight Center and the Michoud Production Facility.; Includes memorandum dated 15 Jan. 1963 from J. H. Chesteen, Chief, Engineering Planning Section. M-ME-SE.; Includes memorandum from J. H. Chesteen and N. E. Johansen to W. B. Edmiston and W. R. Kuers--subject: Integration Boeing-MSFC Manufacturing plan. December 18, 1962.

"Master plan for documentation management and use."

Prepared for National Aeronautics and Space Administration, George C. Marshall Space Flight Center, Huntsville, Alabama. Accepted by V.C. Sorensen, Chief, Management Services Office. Management Services Project, RCA; SUMMARY: The objective of this study is to describe a comprehensive plan for the development and full utilization of methods and means to be employed in the years prior to 1976 for the effective acquisition, collection, storage, retrieval, distribution, and use of engineering documentation. Because of the violently changing state of the art of data acquisition, storage, and retrieval the description of the plan does not embrace the details of a total decade of phased change. Rather it describes actions that can and should be taken in the relatively near future, and proposes a continuing series of later studies to keep this plan current for the full decade.

"Evolution of the Saturn Booster."

8 x 10 inch Black & White photograph. MS-G 103-63 Nov. 22, 63 is on the photograph. Displays the evolution of space-rocket designs side-by-side.

F-1 engine photograph.

8 x 10 inch black and white photograph. Engine parts are labeled.

Double seal insulation [drawing] photograph.

8 x 10 inch black and white photograph.; Drawing contains information about the modified epoxy adhesive, aluminum film, mylar film, perforated phenolic honeycomb core, tank skin, mylar honeycomb core, polyurethane adhesive, weight and thermal conductivity.; Photo negative no. 651746 M-268.

"Conditions contributing to stress corrosion [list] photograph."

8 x 10 inch black and white photograph. A photograph of a list of things contributing to stress corrosion. Referenced by "Materials in Space Exploration." Is part of envelope containing photos accompanying C. E. Cataldo paper "Materials in Space Exploration."

Spaceflight: DDC report bibliography.

Bibliography containing space crews, space flights, satilites, cryogenic propellants, propaganda and the USSR.

"S-IC stage, S-II stage, S-IVB stage, instrument unit drawing."

8 x 10 inch black and white photograph.; Image includes dimensions and labels of exterior features of the rocket.

"Science and technology advisory committee for manned space flight."

This publication contains the Marshal Space Flight Center contribution at the Science and Technology Advisory Committee (STAG) at the Manned Spacecraft Center.

"Saturn V America's moon rocket."

Diagram that displays the Saturn V rocket with a page beneath detailing the function of each stage.

"Saturn I workshop experiments."

April 1, 1968.; Stamped on first page is From the Archives of Frederick I. Ordway, III.

"Saturn I summary."

Summary of the history of the Saturn 1, its missions and its construction.

"Saturn I workshop, 1968."

The Workshop project calls 'for changing a spent Saturn S-IVB propulsion stage into a living area after it has propelled itself into space.

"Saturn I workshop, 1969."

The Workshop project calls for changing a spent Saturn S-IVB propulsion stage into. living and working quarters after it has propelled itself into space.

Orgstrucandmisofaeroendiv_081908151359.pdf

"Organizational Structure and Mission of Aerospace Environment Division"

This document offers a brief description of the Aerospace Environment Division including the basic mission; branches; an organizational directory; and responsibilities of the Environment Research Office, the Atmospheric Dynamics Branch, the Terrestrial Environment Branch, and the Space Environment Branch. William W. Vaughan's name is inscribed on the front page.

"Aero-Astrodynamics Laboratory bimonthly progress report : August and September 1967."

Includes: Projects Office; Advanced Studies Office; Aerospace Environment Division; Astrodynamics and Guidance Theory Division; Aerophysics Division; Dynamics and Fight Mechanics Division; Flight Test Division.

"Aero-Astrodynamics Laboratory monthly progress report : May, 1966."

Monthly progress report for May, 1966.

"Aero-Astrodynamics Laboratory monthly progress report : August, 1966."

Monthly progress report for August, 1966.

"Aero-Astrodynamics Laboratory monthly progress report : February, 1966."

Monthly progress report for Febuary, 1966.

"Aero-Astrodynamics Laboratory monthly progress report : July, 1966."

Monthly progress report for July, 1966.

"Aero-Astrodynamics Laboratory monthly progress report : June, 1966."

Monthly progress report for June, 1966.

"Aero-Astrodynamics Laboratory monthly progress report : September, 1966."

Monthly progress report for September, 1966.

"Common bulkhead drawing."

8 x 10 inch black and white photograph; This is a cutaway drawing of the bulkhead with information about the LH2 tank skin, insulation, Aft LOX bulkhead, 2014-T6 alum skin and fiberglass core. Part of an envelope with photos accompanying C. E. Cataldo paper "Materials in Space Exploration."

"Interface Control Document Definition of Saturn SA-507 Flight Sequence Program."

The purpose of this document is to define the flight sequence events, time bases, stage switch selector channel assignments, LVDA Discrete Outputs, Inputs and Interrupts for the Saturn SA-507 & Subs vehicles. Special requirements and restrictions defined in this document will be imposed on the Marshall Space Flight Center and its contractors as applicable, to insure the proper functioning of the equipment in the various stages for required vehicle timing and sequencing to occur as outlined in this Interface Control Document (ICD).

msfcsystengcapaabstrepo_031607075657.pdf

"MSFC systems engineering capabilities (abstracts of reports)."

List of proposals, plans and other sections with subsections that describe studies or projects under that criteria.

"Measuring instrumentation support."

Article refers to photographs, providing context to what is shown in them with formulas and measurements.

"Saturn V service arms : preliminary engineering report."

This report presents the manufacturing requirements for fabricating Saturn V service arms and contains design and operating details of the service arms and associated equipment. Part 1 defines the areas of responsibility necessary for the manufacture of Saturn V service arms and associated equipment. Capability requirements, manufacturing processes, special techniques, schedules, and other areas are detailed in Part 1. The manufacturer selected to fabricate the arms and related equipment must meet the requirements (stated in Part 1. Part 2 contains design and operation details of the service arms, Command Module Access Arm, and related equipment used on or in support of the Launcher-Umbilical Tower for the Saturn V Vehicle at Complex 39. The design and construction of all basic arms is similar. Eight service arms are being designed. The arms are being designed to support all umbilical lines necessary to service the various stages of all Saturn V Vehicles. The arms are also being designed to allow personnel access to the vehicle. Some of the arms must be retracted before vehicle lift-off and others will retract following lift-off. This requirement necessitated the design of umbilical disconnect and arm retract devices which would ensure clearance between the arms and vehicle during lift-off. The Command Module Access Arm is a separate design concept. The arm is used only for astronaut access to the Command Module. Part 2 presents the preliminary design directed toward meeting the requirements stated above.

"Michoud and Mississippi test operations : May 1965."

This document contains copies of management charts and photographs maintained in the Management Information Office of the Executive Staff on Michoud and Mississippi Test Operations. Information on other MSFC activities and facilities will be published in separate volumes as indicated on the following page. Most of these charges are included in Dr. von Braun's, Dr. Rees' and Mr. Gorman's Management Information Consoles.

Visual aids library slide guide.

This document includes revisions. There are missing pages from page 237-238. This reference document catalogues all MSFC oriented visual aids filed in the Visual Aids Library of Marshall Space Flight Center. These visual aids are updated by the Graphic Engineering & Models Branch, Industrial Operations Program Management Information Office, and the Research and Development Operations Management Office. The purpose of the Visual Aids Library is to provide management data visuals in the form of slides (3 X 4 and 2 X 2), or black and white prints, to MSFC offices and laboratories, and other centers, who have a valid requirement. The visual aids are issued on a loan basis in order to obtain as wide a use for each visual and to assure that the latest revisions are incorporated in the issued item. Visuals may be ordered from the Visual Aids Library, located on the 10th floor of building 4200 (Phone 876-7237, 876-6960, 876-0983). In addition to the visuals published in this book, photographs from prime contractors are available from Industrial Operations, Program Management Information Office, Room 621, building 4201. Visuals with erroneous or obsolete information should be brought to the attention of the Visual Aids Library, preferably in writing, so that corrections can be made immediately. This publication will be kept current through distribution of pages of new visuals and notification will be made on obsolete visuals so they may be crossed out in the catalogue. Comments and suggestions concerning this publication will be greatly appreciated. Changes in the distribution lists should be directed to Mr. Gordon 0. Willhite, or Mrs. Opal Tabor, Visual Aids Library, MS-G.

"Vol. IV 3rd edition Management Information."

This document contains copies of management charts and photographs maintained in the Management Information Office of the Executive Staff on Advanced Program and Research and Technology Areas.

"Repository index of engineering reports and procedures."

This index is an inventory of engineering reports and procedures available in Repository files. The Repository files contain various headquarters, MSFC, MSC, KSC and contractor prepared documents related to the overall MSFC, Apollo Program Requirements. V.C. Sorensen, Chief Management Services Office.; Published quarterly with monthly supplements by: Document Repository Branch; Management Services Office; Marshall Space Flight Center.

Saturn V management information : August 1964 : Volume VI.

This document contains copies of management charts maintained in the Managerial Data Center of the executive Staff on the Saturn V project. To facilitate use of this document, all Saturn V classified data has been removed and will be published in Volume XI. A list of these charts are shown on the "Table of Contents". Information on other MSFC activities will be published in separate volumes as indicated on the "Schedule for Publication of Data Bank Charts" contained in this volume.

Browse Items (716 total)